Type     Solid State
Configuration     Fully balanced, dual-mono
Power Supply Transformer     25VA
Power Supply Capacitance     40,000µF
Balanced Inputs  (XLR)     1 pair
Single Ended Inputs  (RCA)     1 pair
Input Impedance - Adjustable     64 settings from 12.1Ω to 47KΩ
Input Capacitance - Adjustable     16 settings from 0 to 470 pF
Gain - Adjustable     16 settings from 40dB to 70dB
Balanced Output  (XLR)     1 pair
Single-ended Output  (RCA)     1 pair
Input overload @ 40dB gain     200mV RMS (XLR)   /   100mV RMS (RCA)
Input overload @ 55.5dB gain     30mV RMS (XLR)   /   15mV RMS (RCA)
Input overload @ 60dB gain     20mV RMS (XLR)   /   10mV RMS (RCA)
Input overload @ 65dB gain     10mV RMS (XLR)   /   5mV RMS (RCA)
Input overload @ 70dB gain     5mV RMS (XLR)   /   2.5mV RMS (RCA)
Signal-to-noise Ratio  (fs @ 40dB gain)     115dBr
Signal-to-noise Ratio  (fs @ 55.5dB gain)     108dBr
Signal-to-noise Ratio  (fs @ 60dB gain)     105dBr
Signal-to-noise Ratio  (fs @ 65dB gain)     100dBr
Signal-to-noise Ratio  (fs @ 70dB gain)     95dBr
Maximum Output (1kHz @ 10kΩ)     20.0 Volts (XLR)   / 10.0 Volts (RCA)
Output Impedance     50Ω
IEC Curve Effect     -7dB @ 10Hz
Frequency Response     20Hz - 20kHz  (±0.1dB)
Crosstalk @ 1kHz     -106dB
IMD     < 0.001%
THD  (20Hz - 20kHz)     < 0.0008%
    
12 Volt Trigger Output Operation     Direct Logic (0V = off, 12V=on) using a 3.5mm
mono jack with an output impedance of 1000Ω
and current requirement of 12mA
    
Available Faceplate Finishes     Black and Silver
Power Consumption     6 Watts
AC Power Requirements     120V / 60Hz   220-240V / 50Hz
Fuse Replacement   120V   /   220-240V     200mA short slow blow   /   100mA short slow blow
Shipping weight     40 lbs / 18 kgs
Dimensions (W x H x D)     18.75 x 4.1 x 16.81 in.   (47.6 x 10.4 x 42.7 cm.)